Outdoor Roller Banner

Double-sided outdoor pull-up banner, 850mm wide, with ground pegs and 440gsm PVC graphics.

Description

A roller banner that can go outside

Standard roller banners are indoor kit, and the first gust outdoors shows why. This one is built for it, with a heavy base on large twin feet, a three-part heavy-duty bungee pole and ground pegs that hold it steady in winds up to 24mph. It is double-sided as standard, with two graphics printed on 440gsm PVC, so it reads from both directions. A real person checks your artwork before anything is printed.

Key details

Size

850mm wide, with two graphics of 850 × 2175mm — 2025mm of each is visible

Graphics

440gsm PVC, one on each side — a heavy, weather-resilient material, and the two sides can carry different designs

Hardware

Large twin feet, a three-part heavy-duty bungee pole and a snap rail secured with multiple screws

Wind rating

Up to 24mph (38kph) when pegged down with the ground pegs supplied — only 7mph (11kph) without them

Turnaround

Made to order — if you are working to a date, tell us when you order and we'll confirm before we print

Best for

Outdoor events, forecourts, race days, markets, festivals and shop-front promotions

Every order plants trees

The unit is reused from season to season, with the graphics replaced on their own. Through our Print A Tree project with Ecologi, every Printlogik order funds verified reforestation — free, automatic, every time. See the forest grow →

Artwork made easy

Every order includes a free artwork check by a real person — you don't need to ask. If we spot a problem, we'll contact you before anything gets printed.

Outdoor banners are read at a glance and often from further away than indoor ones, so keep the design bold. Supply CMYK PDFs at 850 × 2175mm with fonts outlined or embedded: two files, one for each side, which can be different designs. The bottom 150mm feeds into the base and stays hidden, leaving 2025mm visible, so keep logos, text and contact details out of that strip. The double-sided template is in the Templates section on this page.

Frequently asked questions

How much wind can it take?

Up to 24mph (38kph) when secured with the ground pegs supplied. Without the pegs it should only be used in winds up to 7mph (11kph), so always peg it down outdoors and take it down if conditions go beyond the rating.

How is it different from the Outdoor Water-Base Roller Banner?

This one anchors with ground pegs, so it suits grass and soft ground and has the higher wind rating. The water-base stand is ballasted with water instead, for tarmac and paving where pegs cannot go in. This one is also double-sided and rolls into its base.

Can I use it on a hard surface?

You can, but the pegs are what give it its wind rating. On tarmac or paving you will need to weigh the base down securely and watch the conditions closely.

Is it double-sided?

Yes. Two graphics are included as standard. You can run the same design on both sides or two different ones.

Why does my artwork need to be 2175mm tall?

The lower 150mm anchors inside the base and stays hidden. Design to the full 2175mm and keep everything important within the visible 2025mm.

Can I replace the graphics later?

Yes. You can order replacement graphics and keep the same unit.

Can Printlogik design my banner?

Yes. If you don't have artwork, or yours needs tidying up, our studio can set up your file or create the design from scratch. Ask for a design quote and we'll price it before you commit.