Double-Sided Roller Banner

A pull-up banner with a graphic on each side, 850mm or 1000mm wide.

Description

A banner with no wrong side

Stand a normal roller banner in the middle of a floor and half the room sees the back of it. This one carries two full graphics on a single pole, each 850mm or 1000mm wide with 2000mm on show, printed on 400gsm SoFlat. The two sides are separate prints, so each can carry a different design. A twist-out foot steadies it in open positions and a carry bag is included. A real person checks your artwork before anything is printed.

Key details

Sizes

850mm or 1000mm wide, both with 2000mm visible height on each side — the unit stands 2200mm tall

Two graphics

A full print on each side, on 400gsm anti-curl, anti-scuff, anti-glare SoFlat — the two sides can carry different designs

Hardware

Compact cassette with a large internal graphic housing, a single pole, snap-clip top rail and a twist-out foot

Portability

5kg at 850mm wide, 6kg at 1000mm, with a carry bag included

Turnaround

Made to order — if you are working to a date, tell us when you order and we'll confirm before we print

Best for

Aisles, walkways, entrances, shop floors and exhibition gangways, where people pass in both directions

Every order plants trees

One cassette does the work of two single-sided banners. Through our Print A Tree project with Ecologi, every Printlogik order funds verified reforestation — free, automatic, every time. See the forest grow →

Artwork made easy

Every order includes a free artwork check by a real person — you don't need to ask. If we spot a problem, we'll contact you before anything gets printed.

Roller banners are read from across a room, so use bold type and one clear message. Supply a CMYK PDF at your chosen width × 2150mm with fonts outlined or embedded. The bottom 150mm of the graphic feeds into the base and stays hidden, so keep logos, text and contact details out of that strip. That leaves 2000mm visible on each side. Send two PDFs, or one to be used on both sides. A passer-by only sees one side at a time, so each side needs the whole message. Double-sided templates for both widths are in the Templates section on this page.

Frequently asked questions

When should I choose a double-sided roller banner?

When the banner will not stand against a wall: aisles, entrances, walkways and open floors, where people approach from both directions. Against a wall or in a corner, a single-sided roller banner does the same job.

Can each side have a different design?

Yes. The two sides are separate printed graphics, so you can run branding on one and an offer, menu or directions on the other.

What sizes are available?

Two widths: 850mm (870mm overall, 5kg) and 1000mm (1020mm overall, 6kg). Both stand 2200mm tall with 2000mm of visible graphic on each side.

Why does my artwork need to be 2150mm tall?

The lower 150mm of each graphic anchors inside the cassette and stays hidden. Design to the full 2150mm and keep everything important in the visible 2000mm.

Can I use it outdoors?

It is built for sheltered display. The twist-out foot widens the footprint for open floors, but for outdoor use choose one of our outdoor banner stands.

What is included?

The cassette with its twist-out foot, the pole, the snap-clip top rail, both printed SoFlat graphics and the carry bag.

Can Printlogik design my banner?

Yes. If you don't have artwork, or yours needs tidying up, our studio can set up your file or create the design from scratch. Ask for a design quote and we'll price it before you commit.